"Mid Size Power Boats": A Guide for Discreminating Buyers - by David Pascoe

PHOTO LIBRARY

Related Article

Surveying Wood Hulls:

Part I - Materials and Causes of Problems 

Photos by David H. Pascoe, Marine Surveyor

 

The effects of stray current are usually unmistakable. 
This is the remnant of a zinc anode attached to a bonding system that was subjected to a full twelve volts, leaving an obvious burn pattern. The zinc did its job and the problem was caught in time before serious damage occurred. 



 

Corrosion of stainless bolts by crevice corrosion or acid attack. The prominent feature is that the active corrosion areas are bright metal. 


This is erosion corrosion on a rudder blade caused by propeller wash. It is often mistaken for electrolysis. 

 

Hogging, a condition in which a hull is actually sagging with age, is an accurate indicator that a wood hull has reached the point of severe structural degradation and can no longer be considered safe. This condition is plainly evident on the above yacht. 

 

Go to Article


First posted 5/25/97 at David Pascoe's site www.yachtsurvey.com.

 

Back to TOP

About Author:
David H. Pascoe is a marine surveyor (retired) with 40 years' experience.

He is author and publisher of power boat books:

"Mid Size Power Boats"
"Surveying Fiberglass Power Boats" 2E
"Buyers' Guide to Outboard Boats"
"Marine Investigations"

Visit  yachtsurvey.com  for more than 160 online articles.

David Pascoe's biography

last updated
Back to TOP